Cross Shaft – HOLP -Single Point – Dry Clutch-Fixed Stroke – Mechanical Power Press – H Frame

Features

  • The whole press is authenticated by CE.
  • Welded Steel plate framework with high intensity of machine body.
  • Imported dry type friction clutch and brake.
  • Eight-side lengthened guide with high precision.
  • Equipped with hydraulic overload protecting device.
  • Electric compelling grease lubrication system.
  • Equipped with lifting balance cylinder.
  • Duplex valves with monitoring system.
  • Safety light curtain according to European class four standard.
  • Electronic cam device with intelligent top dead center stop function and several safety function.
  • Controlled by PLC with international brand.
  • Electrical cabinets, Contactors, Push buttons and Indicators are all from international brand.
  • Equipped with several safety relays which meet European class four standard requirements.
  • Optional air cushion device, NC feeding machine and inverter with international brand to fulfill stroke adjustment.
Category:

Specifications

Description JM31-160
JMD31-160		 JM31-200
JMD31-200		 JM31-250
JMD31-250		 JM31-315
JMD31-315
Nominal force kN 1600 2000 2500 3150
Stroke under nominal force mm 6 6 8 8
Slide block stroke mm 160 180 200 200
Number of stroke Fixed min-1 40 35 30 30
Variable 35~50 30~40 25~35 25~35
Max die set height mm 350 450 500 550
Die set height adjustment mm 110 110 120 120
Worktable dimensions
（F・B * L・R）		 mm 740*1050 760*1130 800*1200 850*1250
Thickness of bolster mm 150 160 170 170
Dimensions of Slide block bottom surface （F・B * L・R） mm 650*800 650*850 700*900 750*950
Size of the handle hole
（Diameter * Depth）		 mm φ65*90 φ65*90 φ70*90 φ70*90
Distance between columns of body mm 1150 1200 1320 1370
Dimensions of side hole
（F・B * H）
(Calculation from the plane of worktable)		 mm 760*300 800*370 820*430 880*480
Distance between upper surface of bolster and ground mm 1030 1030 1050 1050
Main motor capacity kW 15 18.5 22 30
Cushion
(Optional)		 Number 1 1 1 1
Knock out force kN 160 160 250 250
Knock out stroke mm 80 80 80 80
Knock out Area mm φ350 φ350 340×540 400×540
Outline dimension
（F・B * L・R * H）		 mm 2480*1750*3500 2570*1810*3610 2950*2080*3850 3150*2200*4000
Net weight kg 20000 24000 31000 36000
Description JM31-400 JM31-500 JM31-630
Nominal force kN 4000 5000 6300
Stroke under nominal force mm 10 10 10
Slide block stroke mm 200 200 250
Number of stroke Fixed min-1 25 20 18
Variable 20~30 / /
Max die set height mm 600 650 700
Die set height adjustment mm 120 120 120
Worktable dimensions
（F・B * L・R）		 mm 900*1350 1000*1500 1200*1700
Thickness of bolster mm 180 190 200
Dimensions of Slide block bottom surface （F・B * L・R） mm 800*1050 900*1200 1100*1450
Size of the handle hole
（Diameter * Depth）		 mm φ80*90 φ80*90 φ90*100
Distance between columns of body mm 1550 1700 1900
Dimensions of side hole
（F・B * H）
(Calculation from the plane of worktable)		 mm 920*520 1020*600 1100*650
Distance between upper surface of bolster and ground mm 1050 1060 1050
Main motor capacity kW 37 45 75
Cushion
(Optional)		 Number 1 1 1
Knock out force kN 250 250 250
Knock out stroke mm 80 80 80
Knock out Area mm 400×540 400×540 400×540
Outline dimension
（F・B * L・R * H）		 mm 3430*2400*4210 3670*2580*4600 4150*2900*5200
Net weight kg 42000 52000 64000

Check out the technical data sheet and machine details in our brochure

Related products

  • Read more

    Cross Shaft – HOLP – Double Point- Dry Clutch – Fixed Stroke – Plunger Guided – Mechanical Power Press – H Frame

  • Read more

    Cross Shaft – HOLP – Double Point – Wet Clutch- Fixed Stroke – Mechanical Power Press – H Frame

  • Read more

    Cross Shaft- HOLP- Single Point- Dry Clutch- Fixed Stroke-Plunger Guided- Mechanical Power Press- H Frame